TANK STABILIZATION: Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome".
TREATMENT: Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate.
BACTERIA GROWTH: The necessary conditions for the growth of Stability's bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the unknown death of an organism), Stability simply becomes more effective.
SAFE: The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of overuse.
Directions:
Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as the dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. The product shelf life is 4 years from the date of manufacture.
Stability® should ideally be used in conjunction with biological filtration such as Seachem Matrix. For emergency ammonia control, use Seachem AmGuard.
Matrix™ is a high porosity biomedia that provides efficient biofiltration for the removal of nitrogenous waste. Matrix™ is a porous inorganic solid about 10 mm in diameter. Each liter of Matrix™ provides as much surface (>~700 m2) as 170 liters of plastic balls! Plastic bio-materials provide only external surface area, whereas Matrix™ provides both external and internal macroporous surface area. These macropores are ideally sized for the support of nitrifying and denitrifying bacteria. This allows Matrix™, unlike other forms of biomedia, to remove nitrate along with ammonia and nitrite, simultaneously and in the same filter.
Matrix™ is completely inert and will not breakdown. It need not be replaced. Since the majority of the bacteria are internal, Matrix™ may be rinsed when needed without damaging the filter. Matrix™ is compatible with all types of wet or wet-dry filters.
Directions:
Use 250 mL of Matrix™ for each 200 L (50 US gallons)** of water. Matrix™ may be placed in any kind of filter, and is particularly effective in a canister filter. Matrix™ is sufficiently large that no filter bag should be required for most applications. Matrix™ works well in drip tray systems, but you may find that the larger Pond Matrix™ is better suited for such applications. Use with Stability® to more rapidly establish the bio-filter.
Purigen® is a premium synthetic adsorbent that is unlike any other filtration product. It is not a mixture of ion exchangers or adsorbents, but a unique macro-porous synthetic polymer that removes soluble and insoluble impurities from water at a rate and capacity that exceeds all other competing products by over 500%. Purigen® controls ammonia, nitrites and nitrates by removing nitrogenous organic waste that would otherwise release these harmful compounds. Purigen’s impact on trace elements is minimal. It significantly raises redox. It polishes water to unparalleled clarity. Purigen® darkens progressively as it exhausts, and is easily renewed by treating with bleach. Purigen® is designed for both marine and freshwater use.
Directions:
Rinse before use. It may be used in a canister filter, media chamber, box filter, or any high flow area of a trickle filter. Each 250 mL treats up to 1,000 L (250 US gallons) for up to six months. Exhaustion is indicated by a pronounced discoloration of the beads to dark brown or black.
TERRA BASE is a new product developed for keeping small orchids, ferns, moss growing in a state close to the condition of natural habitat. This lovingly crafted clay product opens up the possibility of bringing a striking piece of rainforest into your living room and keeping small orchids, ferns and mosses that otherwise grow on rainforest tree trunks in a state that comes close to their natural habitat.
The Terra Base is planted with mosses and epiphytes (by binding or glueing) and placed (e.g. in the Neo Glass AIR tank). The plants are supplied by filling the Terra Base M with water, which seeps through the pores of the pottery and also provides a cooling effect during the warm summer days through evaporation. The plants can also be sprayed with DOOA Wabi-Kusa Mist.
A special cotton thread to fix Willow Moss on driftwood or rocks. It will naturally biodegrade after Willow Moss has taken root to the driftwood or rocks. In a quiet dark green color similar to that of Willow Moss.
Tetra HT Submersible Heater is designed to keep your aquatic fish comfortable, with an electronic thermostat that automatically maintains a consistent water temperature of 78 degrees and prevents overheating, extending heater life. An indicator light lets you know when the water is heating (red light) and when it reaches the proper temperature (green light). Inside, silicon carbide crystals improve heat distribution and transfer. The strong glass tube is heat and shock resistant. This submersible heater is easy to use - just attach to the inside of the aquarium wall using the suction cup (included) in an area with good water circulation.
Features:
AQUARIUM HEATER: Submersible heater is designed to keep your aquarium at the optimum temperature.
AUTOMATIC THERMOSTAT: Electronic thermostat keeps water at a consistent 78 degrees.
INDICATOR LIGHT: The red light shows when water is heating; green indicates that the heater is on standby.
EASYTO USE: Just attach to an aquarium wall - the suction cup securely attaches heater to tank.
Terra Line is a special thread product for securing plants such as epiphytic orchids to driftwood enabling it to secure without melting and breaking in the water. Because it is synthetic fiber, it will not be melt or broken even if it’s used in watery areas. So it is possible to firmly secure plants with less rooting ability and plants that need a lot of time to take roots.
The AIR diffuser uses microspore ceramic stone to produce super fine bubbles. These Micro-bubbles will last longer in the water, which increases its carbon dioxide solubility efficiency.
It is made of transparent acrylic, which is not easily broken unlike other cheap glass diffusers when separating from the aquarium for a cleaning. With the unique ceramic stone and Acrylic bonding technologies, they are durable enough to withstand high pressure for extended reliability.
TANK STABILIZATION: Seachem Stability will rapidly and safely establish the aquarium biofilter in freshwater and marine systems, thereby preventing the #1 cause of fish death: "new tank syndrome".
TREATMENT: Stability is formulated specifically for the aquarium and contains a synergistic blend of aerobic, anaerobic, and facultative bacteria which facilitate the breakdown of waste organics, ammonia, nitrite, and nitrate.
BACTERIA GROWTH: The necessary conditions for the growth of Stability's bacteria strains encompass a very broad range. When other bacteria begin to die off (usually from high organic loads caused by the unknown death of an organism), Stability simply becomes more effective.
SAFE: The bacteria employed by Stability are non-sulfur fixing and will not produce toxic hydrogen sulfide. Stability is completely harmless to all aquatic organisms as well as aquatic plants, thus there is no danger of overuse.
Directions:
Shake well before use. Turn off UV/ozone. Use 1 capful (5 mL) for each 40 L (10 US gallons) on the first day with a new aquarium. Then use 1 capful for each 80 L (20 US gallons) daily for 7 days. Fish and other aquatic species may be introduced at any time as long as the dosage is maintained for 7 days. For optimum biofilter performance use 1 capful for each 80 L (20 US gallons) once a month or with each water change and whenever introducing new fish or whenever medicating an aquarium. The product shelf life is 4 years from the date of manufacture.
Stability® should ideally be used in conjunction with biological filtration such as Seachem Matrix. For emergency ammonia control, use Seachem AmGuard.
Iron is immobile in plants. This means that plants cannot divert iron from older leaves to new ones. Therefore, deficiency symptoms appear first on new or young leaves. Because plants use iron to produce chlorophyll, a lack of iron results in chlorosis, or yellowing, of the younger leaves. Stems may also appear short and slender. If the deficiency is severe and prolonged, each new leaf emerges lighter in color than the preceding leaf.
Directions:
Use 1 capful (5 mL) for each 200 L (50 US gallons) or as required to maintain about 0.10 mg/L iron. For smaller doses please note that each cap thread is about 1 mL. Use as needed to combat signs of iron deficiency (usually seen in new growth) which include: chlorosis (yellowing) of tissue between veins and short and slender stems.
Our CO2ONE system is a fresh new approach to pressurized CO2. Designed for convenience and accessibility - it doesn’t require a specialized gas tank (though it’s compatible with all CO2 sources).
You can just get a common SodaStream canister from the grocery store and you have a fully functional professional grade CO2 System with no compromises. Everything you need is in the box and in 30 minutes you’ll be running a high end pressurized CO2 system that is easier than putting in a new filter.
If you’ve ever wanted the explosive plant growth that only pressurized CO2 can unleash but thought it was just too complicated, expensive and impractical - think again. CO2ONE is so easy and affordable that you’ll wonder why you didn’t do it sooner!
This kit comes with an in-tank diffuser and is compatible with tanks that do not use an external canister filter. If you have a canister filter and an aquarium larger than 70 gallons,consider our in-line system. The in-tank version can be used in any aquarium set-up, including those with external canister filters.
Complete kit includes:
State-of-the-art regulator with adjustable pressure (0-70 psi) for any application.
Balanced poppet spring design for consistent working pressure and no end of tank dumps.
DC Solenoid for silent, cool operation (replaceable) and automatic timing with your lights
Precision needle valve for easy control of flow rate
Included bubble counter and check valve
Interchangeable inlet mount allows you to use any CO2 source
3 meters of specialized CO2 proof high pressure tubing
Choice of 3 of the best in tank diffusers on the market
Handblown low-profile glass drop-checker to monitor your CO2 concentration
Lab grade 4dKh indicator solution for reliable CO2 readings
Stainless steel check valve designed for pressurized CO2
Glass U-Bend for tanks rimless or rimmed tanks to make your setup look neat and tid
Stainless steel multi-wrench for CO2 installation and maintenance (the only tool you'll ever need)
Terra Plate is a ceramic plate made of the same material as Terra Base for epiphytes. Because its surface has a rough texture, it is easy for epiphytes to attach. And because of the high absorbency, it is excellent at controlling humidity. So it is ideal for growing small epiphytic orchids and Tillandsia. There is a ditch on the back to ensure breathability when placed flat.
StressGuard™ is the premium slime coat protection product. StressGuard™ will reduce stress and ammonia toxicity whenever handling or transporting fish. StressGuard™ binds to exposed protein in wounds to promote healing of injured fish and to reduce the likelihood of primary and secondary infections. StressGuard™ is compatible with all medications except those that are copper based. StressGuard™ is not amine based and will not interfere withPurigen®. StressGuard™ does not coat resins or clog filtration like competing “slime coat” type products can.
What makes StressGuard™ very successful at healing is the fact that it contains protein active colloids. This protein active colloidal agent actively seeks out any wounds, abrasions, or places where exposed proteins are and attaches to this area to help directly deliver the disinfectant in the product and start the healing process. This protein active colloid, because it binds to the exposed proteins, also acts like a liquid bandage to the abrasion. Some products are marketed to be squirted in the bag when a fish is purchased. Those products are generally acidic, with some brands being a very strong acid. Putting such a product in a small, enclosed container with a fish often does more harm than any intended good. StressGuard™ has a pH of 7.0. It will not affect the pH of an aquarium, even at large doses. There are no other products on the market that can compare to the effectiveness of StressGuard™.
Directions
Use 1/2–1 capful (2.5–5 mL) to every 40 L (10 US gallons) daily until signs of stress have abated or healing is complete. Dose may be safely doubled.
Bottom Plus refines the leaf color of aquatic plants with vigorous nutrient absorption from the roots, since it is particularly fortified with the nitrogen and iron contents that tend to be deficient in the substrate kept for a long-term. Also, as it is produced from the same natural soil as the raw material of Aqua Soil, the stick never remains in the substrate.
Bacter 100 is a substrate additive, containing more than 100 kinds of substrate bacteria in a dormant state. By sprinkling on the base substrate, it can make an ideal substrate environment. By applying on top of blue green algae, it suppresses the growth of it.
Terra Tape is a self-adherent water retentive tape product for keeping from drying out by winding it around driftwood and creating an appropriate environment for growing epiphytes such as moss. Please wind it around driftwood while leaving its end in the water and put some moss on top of the tape in the area above water for aqua terrarium and paludarium.
The CO2 diffuser uses microspore ceramic stone to produce super fine bubbles. These Micro-bubbles will last longer in the water, which increases its carbon dioxide solubility efficiency.
It is made of transparent acrylic, which is not easily broken unlike other cheap glass diffusers when separating from the aquarium for cleaning. With the unique ceramic stone and Acrylic bonding technologies, they are durable enough to withstand high pressure for extended reliability.
Microspore ceramic stoneproduces ultra fine bubbles.
Micro-bubbles will last longer in the water, increasing its dioxide solubility efficiency.
Transparent acrylicdesign & Shatter-proof.
Unique ceramic stone and acrylic bonding technologies that is durable enough to withstand CO2 system's high pressure.
Compact and light weight design.
CO2 is key to photosynthesis and a healthy planted aquarium.
The AquaClear 30 Power Filter features a unique multi-stage filtration system that provides complete mechanical, chemical and biological filtration for superior water quality. The Power Filter has a filtration volume that is up to 7 times larger than comparable filters. It also allows superior contact time with filter media. The filter preserves beneficial bacterial creating a stress-free environment for aquarium inhabitants and maintaining clear aquarium water. Its unique waterfall design enables filtered water to return to the tank silently, gently breaking the surface tension and creating beneficial oxygenation. The Power Filter’s patented flow control feature allows you to adjust the water flow according to your aquarium needs. The media basket prevents water from by-passing the filter media, maximizing filtration efficiency. Installation and maintenance are quick, easy and convenient. The filter comes equipped with AquaClear Foam, Activated Carbon and BioMax. AquaClear offers an extensive line of media, including Zeo-Carb and Ammonia Remover, exclusively designed for the AquaClear 30 Power Filter.
Maximum Output: 568 L/h (150 U.S. Gal./h)The AquaClear 30 Power Filter is ideal for 38 to 114 L (10 to 30 U.S. gallons) aquariums.
Made from special CO2 resistant materials and designed to be used permanently under pressure.
Unlike regulator aquarium airline tubing, high pressure CO2 tubing is specifically designed to withstand long term exposure to pressurized carbon dioxide and will not become brittle, crack, discolor or leak. Regular airline tubing is porous to CO2 gas and when used under high pressure up to 50% of the CO2 being injected can leak out before reaching your aquarium!
Our tubing ensures that all of your precious CO2 makes it to the diffuser or atomizer without any unwanted surprises.
