The AIR diffuser uses microspore ceramic stone to produce super fine bubbles. These Micro-bubbles will last longer in the water, which increases its carbon dioxide solubility efficiency.
It is made of transparent acrylic, which is not easily broken unlike other cheap glass diffusers when separating from the aquarium for a cleaning. With the unique ceramic stone and Acrylic bonding technologies, they are durable enough to withstand high pressure for extended reliability.
The CO2 diffuser uses microspore ceramic stone to produce super fine bubbles. These Micro-bubbles will last longer in the water, which increases its carbon dioxide solubility efficiency.
It is made of transparent acrylic, which is not easily broken unlike other cheap glass diffusers when separating from the aquarium for cleaning. With the unique ceramic stone and Acrylic bonding technologies, they are durable enough to withstand high pressure for extended reliability.
Microspore ceramic stoneproduces ultra fine bubbles.
Micro-bubbles will last longer in the water, increasing its dioxide solubility efficiency.
Transparent acrylicdesign & Shatter-proof.
Unique ceramic stone and acrylic bonding technologies that is durable enough to withstand CO2 system's high pressure.
Compact and light weight design.
CO2 is key to photosynthesis and a healthy planted aquarium.
Great for use with CO2 injection systems or bubblers
The 10 mm glass U Tube allows you to easily run airline (preferably silicone) for CO2or for general air supply over the rim of the aquarium without bending or creasing. Made of strong clear glass, which minimizes visibility of tubing.
Compatible with 6 mm (1/4") - Standard Airline Tubing.
Made from special CO2 resistant materials and designed to be used permanently under pressure.
Unlike regulator aquarium airline tubing, high pressure CO2 tubing is specifically designed to withstand long term exposure to pressurized carbon dioxide and will not become brittle, crack, discolor or leak. Regular airline tubing is porous to CO2 gas and when used under high pressure up to 50% of the CO2 being injected can leak out before reaching your aquarium!
Our tubing ensures that all of your precious CO2 makes it to the diffuser or atomizer without any unwanted surprises.
Our high pressure acrylic 2 in 1 diffuseris an innovative, gasketed design that produces large amounts of CO2 micro-bubbles without any leakage!
The diffusion membrane is joined to the body with an elastomer gasket sealing ring which ensures that all CO2 passes through the microporous ceramic. The thread and gasket design is adjustable in case of sudden temperature changes for 100% leak proof protection.
The sealed design allows this diffuser to process an large amount of high pressure CO2, great for higher bubble rates and larger aquariums.
Like our NANO acrylic diffuser, this model also comes with anintegrated bubble counterfor checking your CO2 flow rate at a glance.
The protruding design of the ceramic membrane dramaticallyreduces cloggingand algae growth compared to the recessed membranes of glass diffusers so all of your CO2 flows through the membrane and not around it. In case of a clog, the diffusion plate is removable and can be easily cleaned by soaking overnight in bleach.
This diffuser produces a steady stream of bubbles and is ideal for strategic placement just in under a filter or powerhead intake for extremely effective CO2 delivery directly to your plants.
Automatically turn your CO2 system on and off with your lights by attaching this convenient in-line solenoid valve to your CO2 tubing. Perfect for those disposable cartridge kits or any other CO2 regulator that does not have a built-in solenoid valve. Plug this into a timer and stop fiddling with your regulator every morning.
CO2 is only necessary when the lights are on and plants are photosynthesizing. Wealwaysrecommend cutting off CO2 at night when plants (and animals) are respiring and consuming oxygen. Even if it doesn't hurt your aquarium inhabitants, it's a huge waste of CO2 which is already very expensive with disposable cartridges. Synchronizing CO2 to your lights for 8 hours a day uses only 1/3 as much as running it around the clock so your cartidges last you three times as long!
SODASTREAM and paintball adapters for cartridge CO2 systems
2 in stock
Use your disposable cartridge CO2 kit with refillable SodaStream or paintball canisters and save a bunch of money and time!
Fits systems from Tropica, Fluval, UP Aqua and ISTA or other equipment designed for 45g-95g disposable cartridges (5/8-18UNF). Each SodaStream bottle contains 5-10 times the amount of CO2 while Paintball canisters hold even more depending on their size. Run CO2 for months at a time without having to change your tank. Refills are inexpensive, convenient and cost far less than buying more super wasteful disposable cartridges.
A glass-made instrument created specifically for examining the CO2level of the aquarium with a simple procedure. Add some pH reagent and aquarium water to Drop Checker. Then, set it inside the tank.
Insufficient (add more CO2)
Green - Optimum
Yellow - Excessive (reduce CO2)
Note: Includes a pH reagent (5ml) Note: In case the reagent turns yellow from the beginning, due to the low pH value in the aquarium, the reagent color does not change even after adding further CO2. In such a case, please make a water change for raising pH level, and make sure the reagent turns blue or green before resetting Drop Checker in the aquarium.
Large surface area of diffuser disc ideal for high volumes of CO2 gas
Built in bubble counter makes the use of a separate bubble counter unnecessary
Simple and easy to use
The Spiral Bubble Counting Diffuser is a pollen style CO2diffuser that connects to CO2injection systems to easily disperse CO2gas into the planted aquarium. The built-in spiral bubble counter allows for easy monitoring of the rate of CO2injection. The inclusion of a bubble counter in the diffuser makes the use of a bubble counter on the CO2tank or in-line unnecessary. The Spiral Bubble Counting Diffuser has a 30 mm disc.
Compatible with 6 mm (1/4") - Standard Airline Tubing. Suction cup included.
A replacement reactor for M5 / M3 / Shrimp 50 / Shrimp 30It is also compatible for the S5 / S3
Instruction on How to Clean Your Reactor
If your Reactor is dirty or contaminated, using a bleach (such as Clorox or ADA Superge) will clean it. This is will increase your lifespan period. Please do not use a brush when cleaning the Reactor, metal coating can be damaged.
If the reactor's surface is covered with algae:
1.) Mix 150ml of bleach (such as Clorox) with 150ml water.
2.) Soak the reactor in the mixture for 30 minutes.
3.) Place the reactor in water with de-chlorination liquid added for few minutes. Then, Make sure rinse off all remaining bleach with running water.
Bubble counter, reflux valve and ceramic diffuser in one. Customized ceramic disc, ensuring the efficient creation of microbubbles. Increases CO2 utilization as opposed to a regular air stone.
Tropica’s CO2 diffuser contains a bubble counter, reflux valve, and diffuser in just one unit. The bubble counter enables easy and accurate CO2 dosage since it is easy to count the big bubbles inside the chamber during adjustment. A reflux valve prevents the aquarium water from being sucked backward, which is possible when the bottle gets empty, or in case you use a magnet valve to turn off the CO2 supply during the night. TIP: in order to ensure perfect adherence to the glass, make sure that the glass is clean and grease-free; apply an ultra-thin layer of Vaseline on the suction pads to ensure adherence.